How to Resurface a Plastic Cutting Board: step-by-step Guide

Over time, even the most carefully used cutting board can start to look worn and tired. Deep cuts and scrapes leave their mark, while exposure to strong cleaners can cause the plastic to fade and crack. As a result, plastic cutting boards can become unsightly and even dangerous to use. That is the reason you need to resurface your plastic cutting board or buy a new one. Now the question here is how to resurface s plastic cutting board and is it the only way to refresh it.

Be with us if you want a clear answer to how you can refresh or resurface a plastic cutting board

One thing you must know is not every cracked cutting is meant to be resurfaced you can deeply clean a plastic cutting board to refresh but it can only be done when the board is slightly dirty and has scratches.

Here is a step-by-step guide on how to resurface a plastic cutting board when it gets deep cracks.

what you need to Refresh That Old Plastic Cutting Board

with your old and cracked plastic cutting board you need the following tools to refresh the plastic cutting board:

Now you have all the things you need to refresh the cracked plastic cutting board you are ready to start the process of resurfacing.

step 01: Clamp the board

It’s always better to be safe than sorry when working with power tools, which is why you should always cover your work surface with a drop cloth or newspaper before beginning any sanding project.

This will help to catch any wood chips or dust that are created during the sanding process, making cleanup much easier. In addition, it’s important to clamp the board securely to your work surface before beginning.

This will help to prevent the board from moving around during sanding, which could lead to an uneven finish. By following these simple tips, you can ensure that your sanding project goes smoothly from start to finish.

step 02: Prepare the cutting board for sanding

Before beginning any sanding project, it is important to properly prepare the surface. This is especially true when working with plastic, as even small bits of debris can quickly gum up the sandpaper.

The first step is to scrape away any loose bits of plastic with a metal dish scrubber or extra-course steel wool. This will help to prevent the sandpaper from clogging and will make the sanding process much more efficient. Once all of the loose plastic has been removed, the surface can then be wiped down with a damp cloth to remove any remaining dirt and dust.

Only after the surface is thoroughly clean should sanding begin. By taking the time to properly prepare the cutting board before beginning, the entire sanding process will be much smoother and more successful.

step 03: Start the sanding process

When sanding a cutting board, it’s important to use the right grit of sandpaper. For best results, start with 25 grit and progress to 80 grit. This will ensure that the top layer of the board is removed without damaging the surface.

Be sure to use eye protection and a dust mask when sanding, as the process will kick up dust which can be harmful if inhaled. You may also notice an unpleasant smell coming from the board as the sander warms the dust – this is normal and should not be cause for concern. With proper care and sanding, your cutting board will last for many years to come.

step 04: perfect the sanding process..

If you’re working with a plastic cutting board that has a lot of deep cuts or gouges, sanding alone may not be enough to create a smooth surface. In these cases, you may need to carefully scrape away the top layer of the plastic by cutting with a razor blade, a knife blade, or ideally, a hand plane.

Once you’ve removed the rough surface, continue sanding until all of the grooves, scratches, and gouges are gone and the surface is nice and smooth. With a little patience and elbow grease, you’ll be able to get your piece of wood looking like new again.

step 05: keep cleaning the cutting board

Sanding is an important part of the preparation process for staining or painting any surface, but it can be especially challenging when working with polyethylene.

This material has a tendency to statically cling to itself, making it difficult to create a smooth surface. In order to help expedite the process, it is important to periodically wipe the surface with a ball of steel wool or scrubber brush to remove any burs and the dust that the sander has kicked up.

This will help to create a smoother surface and make it easier to achieve the desired results.

step 06: Clean the Edges of the board

To ensure that my paint or stain covers the entire surface of a board, I take time after sanding to scrape off any sharp edges. This gives it an even appearance and helps prevent anything from sticking up unexpectedly when you’re finished with your project!

This gives the board a much cleaner look and helps to prevent any sharp edges from forming. In addition, this step helps to ensure that the paint or stain will adhere evenly to the surface of the board. As a result, taking the time to clean the edges of a board before painting or staining is well worth the effort.

step 07: Thoroughly Clean the Board to give a perfect finish

Cleaning the cutting board should be a three-step process. First, rinse with water in a sink to remove loose dust and particles before applying kitchen soap – this will help get rid of any dirt on your hands when cleaning so that they don’t leave behind stains or dirt while making dinner! The second step is rubbing away at polyethylene film using sponges not designed for use around food (you’ll want one specifically made just for cleaning cutting boards). Finally, rinse the board one last time with water to remove any leftover soap residue.

step 08: Apply a food-grade mineral oil

After the board is clean and dry, it’s time to apply food-grade mineral oil. This will help to protect the board from water damage and keep it looking new for years to come.

To apply, simply pour a small amount of oil onto the board and spread it around with a clean cloth. Be sure to rub the oil into all of the crevices and corners, as this is where moisture is most likely to cause damage.

Once the board is evenly coated, allow it to sit for at least an hour so that the oil can absorb into the wood. After the board has had time to absorb the oil, wipe away any excess with a clean cloth.

step 09: Store the board properly

Once your board is clean, dry and oiled, it’s important to store it in a cool, dark place. This will help to prevent the polyethylene from discoloring or becoming brittle over time.

If you’re not planning on using the board right away, it’s a good idea to wrap it in plastic wrap or store it in a zip-top bag. This will help to keep the board clean and free from dust until you’re ready to use it again.

step 10: Enjoy your beautiful, refreshed/ resurfaced cutting board!

You’ve now successfully cleaned and oiled your cutting board. All that’s left to do is enjoy using it! Be sure to take proper care of your board by following the storage instructions above. With proper care, your board will last for years to come.

Is sanding the plastic cutting board the only way to refresh it?

If you’re looking to refresh your plastic cutting board, sanding it is one way to do it. This will help to smooth out any rough edges and give it a new lease on life. However, you can also achieve the same result by using a sanding machine. This can be a quicker and easier option, and it will still leave your cutting board looking like new. Whichever method you choose, refreshing your plastic cutting board is a great way to prolong its lifespan.

why resurfacing a plastic cutting board is necessary?

Over time, even the best plastic cutting boards can start to show scratches and wear. While light scratches can usually be sanded away, deeper scratches can be more difficult to fix. In these cases, it may be necessary to resurface the cutting board. This process involves sanding down the surface of the board to remove any damaged layers and create a smooth, even surface.

This will help to prevent bacteria from becoming trapped in the cracks and causing cross-contamination. In addition, it is important to replace cutting boards that are deeply cracked.

These boards can be a breeding ground for bacteria, so it is best to err on the side of caution and resurface your cutting board when you feel it’s deeply cracked. By taking these simple steps, you can help to keep your cutting board in top condition.

Here are some tips on how to maintain your new resurfaced cutting board! 

The first thing you should do after getting a fresh one washes it with warm soapy water. You can also add dish soap and lemon juice if needed, which will help cut down any stains from foods like blood or wine (or other things!). If the color starts looking dull after regular use- just rub over all parts of its surface using either hands OR power tools such as a sponge/brush attachment for our sink bathroom cleaner plus MORE importantly… rinse thoroughly under hot running waters before drying off completely because leaving wet towels sitting around causes microorganisms growths that you definitely don’t want on your food-prep surfaces!

what to do with the old plastic cutting board?

The good news is that you can refresh your old plastic cutting board in just 8 simple steps mentioned above. the same thing can be achieved by a resurfacing machine.

How do I remove stains from my cutting board?

If your cutting board is stained, you can try scrubbing it with a paste made from baking soda and water. For tough stains, you may need to let the paste sit on the board for a few minutes before scrubbing. You can also try using a vinegar and water solution to remove stains.

How do I clean my cutting board after each use?

It’s important to clean your cutting board after each use to prevent the spread of bacteria. You can clean your board with warm soapy water, or you can use a vinegar and water solution. Be sure to rinse the board well with hot water after cleaning.

Leave a Comment